
- [FX3H] Digital Humidity Controller (Relay output 1 points)
- - Humidification/Dehumidification Output
- High/Low Limit Alarm
- Sensor Calibration
- Sensor Error Detection and On/Off Output Control
- Minimum On/Off Duration Time
Depending on the purpose, users can select between humidification and dehumidification output.
High/Low Limit Alarm
Sensor Calibration
Users can calibrate a sensor by adjusting between sensored and actual humidity.
Sensor Error Detection
It detects the sensor errors automatically and alarms immediately. Users can set the on or off output when a sensor error occurs.
Minimum On/Off Duration Time
Regardless of conditions, it maintains on or off status during the period set by user.
■ Technical Specifications
FX3H-00 | ||
---|---|---|
Dimensions | 78(W) X 35(H) X 78(D)mm ※ Panel Cut-Out Form 71(W) X 29(H)mm |
|
Power | 100~240Vac, 50/60Hz | |
Power Consumption | 4VA | |
Connection | Screw Terminal(Up to 1.5㎟ Wire) | |
Input Output |
Humidity Sensor Input | 1P(1~3.6V) |
Relay Output | 1P(250Vac/16A) | |
Sensor | Humidity | HTX20-FTS-502(Optional) Range: 0~100%RH Output: 1~3.6V HTX3515(Optional) Range: 0~100%RH Output: 1~3.6V |
Analog Signal Output (4-20mA) |
- | |
RS485 Communication (MODBUS RTU/ASCII) |
- | |
Operation | Temperature -10~50℃ / Humidity under 90% RH | |
Storage | Temperature -20~60℃ / Humidity under 90% RH |
■ Accessories
Category | Model | Specifications |
Temperature & Humidity |
HTX20-FTS-502 | Range: 0~100%RH Output: 1~3.6V |
Humidity | HTX3515 | Range: 0~100%RH Output: 1~3.6V |