call- [FX3D-Sync] Digital Temp Controller(synchronization)
- - Powerful Dual Measurement and Control
- Perfect Syncing according to a Sensored Temperature
- Accurate Temperature Set
- Smart Control(Various Control Modes)
- Precise Temperature Control, sensor calibration, sensor error detection, data backup
More precise temperature control according to a set point
Various sensor applications and perfect sensor calibration
Smart Control(Various Control Modes)
Control at operation cycle or ratio when error occurs.
Heating/cooling output, independent timer output, upper limit/lower limit alarm, defrost output
Simple Setup for User Convenience
Simple or custom setup for user convenience
Parameter limits to prevent erros and artifical intelligent temperature control
Sensor Calibration
Users can calibrate a sensor by adjusting between sensored and actual temperature.
Sensor Error Detection
It detects the sensor errors automatically and alarms immediately.
Automatic Output Cycle after Sensor Error
In terms of risk management, users can configure the automatic output cycle after sensor error.
Auto Save and Restoration of Parameter Values
Parameter values are saved into the nonvolatile memory safely and restored after blackout automatically.
You can always use with peace of mind.
Minimum On/Off Duration Time
Regardless of conditions, it maintains on or off status during the period set by user.
Analog Signal Output(4-20mA)
FX3D-Sync transmits the analog signal(4-20mA) to other devices or equipments.
Communication via RS485 MODBUS
It is versatile. Communication via RS485 provides many options to the users
(remote control, remote display, data manipulation, and etc.)
■ Technical Specifications
| FX3D-Sync-00 | FX3D-Sync-A1 | FX3D-Sync-R4 | ||
|---|---|---|---|---|
| Dimensions | 78(W) X 35(H) X 78(D)mm ※ Panel Cut-Out Form 71(W) X 29(H)mm |
|||
| Power | 100~240Vac, 50/60Hz | |||
| Power Consumption | Max. 6VA | |||
| Display | FND, LED Type(0.1 ℃ Display) | |||
| Connection | Screw Terminal(Up to 1.5㎟ Wire) | |||
| Input/Output | Temperature Sensor Input |
2P, Dotech Standard NTC Sensors(DPR-TH01,DPR-TH02) | ||
| Relay Output | 2P(250Vac/5A) | |||
| Sensor | Temperature |
DOTECH Standard NTC sensor DPR-TH01 Type : NTC 5KΩ Range : -50~105℃ Accuracy : ±0.3℃ at 25℃ DOTECH Standard NTC sensor DPR-TH02(Optional) Type : NTC 10KΩ Range : -50~150℃ Accuracy : ±1.5℃ at 25℃ |
||
| Analog Signal Output (4-20mA) |
- | OK | - | |
| RS485 Communication (MODBUS RTU/ASCII) |
- | - | OK | |
| Operation | Temperature -10~50℃ / Humidity under 90% RH | |||
| Storage | Temperature -20~60℃ / Humidity under 90% RH | |||
■ Accessories
| Category | Model | Specifications |
| Temperature Sensor | DPR-TH01 | Type : NTC 5KΩ Range : -50~105℃ Accuracy : ±0.3℃ at 25℃ |
| DPR-TH02 | Type : NTC 10KΩ Range : -40~150℃ Accuracy : ±1.5℃ at 25℃ |
