[BX1500] Air Source Heat Pump Controller

call

[BX1500] Air Source Heat Pump Controller

- Proven control logic for air source heat pump
- 2-compressor control
- Efficient defrosting detection
- Reverse cycle defrosting
- Reverse phase and phase loss detection
- 2-display support
- Up to 99 control modules per display
- 2-Ch RS485 support
- International standard communication protocol(MODBUS RTU/ASCII SLAVE)
- 4-setp access control for parameter change

- Proven control logic for air source heatpump
- 2-compressor control
- Efficient defrosting detection
- Reverse cycle defrosting
- Reverse phase and phase loss detection
- 2-display support
- Up to 99 control modules per display
- 2-Ch RS485 support
- International standard communication protocol(MODBUS RTU/ASCII SLAVE)
- 4-setp access control for parameter change




■ Technical Specifications

			BX1500M	BX1500L
Control Module	Dimensions		240(W) x 110(H) x 50(D)mm
	Power		AC24V +/-15% 50/60Hz Max. 20VA
	Digital	Input	12 POINT, 12Vdc 4mA	16 POINT, 12Vdc 4mA
		Output	12 POINT, 250VAC/5A	16 POINT, 250VAC/5A
	Analog	Input	8 POINT NTC Temperature Sensor	12 POINT NTC Temperature Sensor 4 POINT 4~20mA
	Communication		2 CHANNEL RS485 MODBUS RTU/ASCII SLAVE
	Additional function		Reverse phase(Phase loss) detection
	Operation Environment		Temperature -10~60℃ / No Condensation State
	Storing Environment		Temperature -20~80℃ / No Condensation State
Display Module	Model		CPAD-BX1500
	Power		DC8 ~ DC12V
	Communication		RS485 MODBUS MASTER (9600BPS)
	Display		LCD FSTN, 128X64 dots, White LED Backlight
	Switch		Electrostatic Touch Switch 8EA
	Lamp		LED 8EA
	Dimensions		156(W) X 82(H), Depth within 20mm
	Protection class (Front cover)		IP65(Gasket)
	Operation Environment		Temperature -10~60℃ / No Condensation State
	Storing Environment		Temperature -20~80℃ / No Condensation State

■ Accessories

Category		Model	Specifications
Power Trans		24069001	AC220V to AC24V, 30VA
Temp. Sensor	Discharge gas temperature	DPR-TH02-P6D100L	Type: NTC 10KΩ Temperature range: -40 ~ 150℃ Accuracy: ±0.3℃ at 25℃
	Inlet/outlet temperature	DPR-TH01-S6D100L	Type: NTC 5KΩ Temperature range: -50 ~ 105℃ Accuracy: ±0.3℃ at 25℃
	Ambient Temperature Suction Temperature Evaporation Temperature	DPR-TH01-ET-3M	Type: NTC 5KΩ Temperature range: -50 ~ 105℃ Accuracy: ±0.3℃ at 25℃
Cable	Control Module and Display	CK4002-2M	For CPAD-BX1500 and BX1500M/L
		CK4002-5M	For CPAD-BX1500 and BX1500M/L
	Control Module and Remote	CK4001-2M	For RCON10-BX1500 and BX1500M/L

Related product you might see: